Категории
QFabric System Juniper - QFX Серия
Data Rate | |
QFX3000-M | 5.12 Tbps switching capacity |
Dimensions | |
QFX3008-I QFabric Interconnect | (W x H x D) 17.5 x 36.75 x 32 in (44.45 x 93.34 x 81.28 cm)- 21U |
QFX3100 QFabric Director | (W x H x D) 17.5 x 3.5 x 23.75 in (44.45 x 8.89 x 60.33 cm)- 2U |
QFX3500 QFabric Node | (W x H x D) 17.25 x 1.75 x 28 in (43.82 x 4.45 x 71.12 cm)- 1U |
QFX3600 QFabric Node | (W x H x D) 17 x 1.74 x 19.4 in (43.2 x 4.4 x 49.3 cm)- 1U |
QFX3600-I QFabric Interconnect | (W x H x D) 17 x 1.74 x 19.4 in (43.2 x 4.4 x 49.3 cm)- 1U |
FCoE/FC | |
FC Interfaces | 1536 max |
FCoE Interfaces | 6144 max |
Transit switch / FIP snooping FCoE sessions | 48000 max |
VF_Ports | 384000 max |
Form Factor | |
QFX3100 QFabric Director | Да |
QFX3500/QFX3600 QFabric Node | Да |
QFX3600-I/QFX3008-I QFabric Interconnect | Да |
IPv4 Unicast Routes | |
16000 | Да |
Jumbo Frames | |
9216 Bytes | Да |
Latency | |
3 to 5us across fabric under typical loads | Да |
MAC Addresses | |
120000 – 1536000 | Да |
Number of VLANs | |
4095 active 4089 configurable | Да |
Operating System | |
Junos | Да |
Port Densities | |
From 200 to 6144 server-facing 10GbE/FCoE ports in a single QFab | Да |
Power Options | |
Power consumption (maximum) | 365 Watts |
Power consumption (nominal) | 230 Watts QFX3600 QFabric Node |
Power feed (voltage) | 100 to 240 V AC (single phase) and 50/60 Hz or -40 to -72 V DC |
QoS | |
Policers (ingress and egress) | 1500 per QFX3500/QFX3600 QFabric Node |
Queues | 12 per QFX3500/QFX3600 QFabric Node—8 unicast and 4 multicast |
Resiliency | |
Redundant control boards QFX3100 QFabric Director | |
Redundant disk drives | Да |
Redundant fabric cards | Да |
Redundant fan trays QFX3008-I QFabric Interconnect | |
Redundant fan trays QFX3600-I QFabric Interconnect | |
Redundant power supplies | Да |
Traffic Monitoring | |
ACL-based | Да |
LAG port | Да |
Mirror to local and remote destinations (L2 over VLAN) | Да |
Port-based | Да |
VLAN-based | Да |
Warranty | |
Juniper standard one-year warranty | Да |
The QFabric System, composed of multiple components working together as a single switch, delivers any-to-any connectivity, high performance, and management simplicity, making it the ideal foundation for cloud-ready, virtualized data center environments
The QFabric System, composed of multiple components working together as a single switch, delivers any-to-any connectivity, high performance, and management simplicity, making it the ideal foundation for cloud-ready, virtualized data center environments.The QFabric components appear as a single switch, enabling any-to-any connectivity for servers, storage, existing network components, and other critical systems in the data center while providing a foundation for cloud-ready, virtualized and mobile computing environments.The QFabric System components include:The QFabric System is highly scalable and has unmatched simplicity that improves application performance by delivering low latency and converged services in a nonblocking and lossless architecture. Featuring Layer 2, Layer 3 and Fibre Channel over Ethernet (FCoE) capabilities, the QFabric System is available in two models:For investment protection, existing QFabric System components can be redeployed between the two models, greatly simplifying flexibility and migration. For example, users can initially deploy a QFX3000-M and, as their 10GbE demands grow, they can migrate to a QFX3000-G with the simple replacement of the QFabric Interconnect, dramatically increasing scale.Разработано «Джусто Веб» © 2014
Ресурс создан при поддержке ООО «Джусто Групп» для ознакомления пользователей с продукцией Juniper Networks. Логотипы, названия других компаний и продуктов, упомянутые на данном ресурсе, являются зарегистрированными товарными знаками соответствующих владельцев.