Категории
WLA432 Wireless LAN Access Point Juniper - WLA Серия
Antenna | |
Antenna | Internal integrated |
Antenna Qty | 6 |
Directivity | Omni-directional |
Environmental Parameters | |
Humidity Range Operating | 10 - 95% (non-condensing) |
Max Operating Temperature | 122 °F |
Min Operating Temperature | 32 °F |
Expansion / Connectivity | |
Interfaces | 2 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
General | |
Data Link Protocol | IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n |
Device Type | Wireless access point |
Dimensions (WxDxH) | 3.3 in |
Enclosure Type | External - indoor |
Features | Power over Ethernet (PoE) Wireless Distribution System (WDS) support MIMO technology Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support SpectraLink Voice Priority (SVP) support Quality of Service (QoS) |
Frequency Band | 2.4 GHz 5 GHz |
Power Over Ethernet (PoE) Supported | Да |
Miscellaneous | |
Compliant Standards | ICES-003 Class B FCC Part 15 B EMC IC MIC UL 2043 FCC R&TTE RoHS IEC 60950-1 WEEE EN 301.893 EN 60601-1-2 CSA C22.2 No. 60950-1 IP67 |
Networking | |
Compliant Standards | IEEE 802.3u IEEE 802.3i IEEE 802.11b IEEE 802.11a IEEE 802.3af IEEE 802.11g IEEE 802.1x IEEE 802.11i IEEE 802.11e IEEE 802.11n IEEE 802.11n (draft 2.0) IEEE 802.3at |
Connectivity Technology | Wireless |
Data Link Protocol | IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n |
Encryption Algorithm | AES TKIP WPA WPA2 |
Features | Power over Ethernet (PoE) Wireless Distribution System (WDS) support MIMO technology Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support SpectraLink Voice Priority (SVP) support Quality of Service (QoS) |
Form Factor | External |
Frequency Band | 2.4 GHz 5 GHz |
Spread Spectrum Method | OFDM DSSS |
Status Indicators | Power status |
Power | |
Power Over Ethernet (PoE) Supported | Да |
Processor / Memory / Storage | |
Hard Drive | None. |
Juniper Networks AP with dual radios 802
Juniper Networks AP with dual radios 802.11a/n/b/gn 3x3 MIMO, dual 1000Base-T 802.3af PoE Ethernet ports with (pre-standard) High Power PoE support internal (3*3) MIMO antennas. Requires software Version 7.0 or later. The WLA432 Wireless LAN Access Point is a high-performance 802.11n dual radio 3 x 3 MIMO indoor access point designed for low-density deployments requiring maximum coverage. It is simple to deploy and easy to manage.It is backward compatible with legacy 802.11 a/b/g clients in the 2.4 GHz and 5 GHz bands, packaged in an inconspicuous design with built-in locking for security and internal antennas.The WLA432 plays a key role in wireless intrusion detection systems and wireless intrusion prevention systems (WIDS/WIPS) as well as denial-of-service (Dos) attack detection. It features ActiveScan which allows it to scan all 802.11 channels while simultaneously providing wireless connectivity to mobile clients. In addition, SentryScan allows the WLA432 to act as a dedicated sentry and provide non-stop scanning.Разработано «Джусто Веб» © 2014
Ресурс создан при поддержке ООО «Джусто Групп» для ознакомления пользователей с продукцией Juniper Networks. Логотипы, названия других компаний и продуктов, упомянутые на данном ресурсе, являются зарегистрированными товарными знаками соответствующих владельцев.