Категории
WLA322-US Juniper - WLA Серия
Antenna | |
Antenna Qty | 4 |
Environmental Parameters | |
Humidity Range Operating | 10 - 95% (non-condensing) |
Max Operating Temperature | 122 °F |
Min Operating Temperature | 32 °F |
Expansion / Connectivity | |
Interfaces | 1 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
General | |
Data Link Protocol | IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n |
Device Type | Wireless access point |
Dimensions (WxDxH) | 5.4 in x 1.9 in x 5.6 in |
Enclosure Type | External - indoor |
Features | Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support Quality of Service (QoS) 2T2R MIMO technology Cyclic Delay Diversity (CDD) Space Time Blocking Code (STBC) |
Frequency Band | 2.4 GHz 5 GHz |
Localization | United States |
Power Over Ethernet (PoE) Supported | PoE+ |
Miscellaneous | |
Compliant Standards | ICES-003 Class B FCC Part 15 B R&TTE RoHS IEC 60950-1 WEEE EN 301.893 EN 60601-1-2 CAN/CSA C22.2 No. 60950-1 |
Networking | |
Compliant Standards | IEEE 802.3u IEEE 802.3i IEEE 802.3ab IEEE 802.11b IEEE 802.11a IEEE 802.3af IEEE 802.11g IEEE 802.1x IEEE 802.11i IEEE 802.11e IEEE 802.11n IEEE 802.3at IEEE 802.3az |
Connectivity Technology | Wireless |
Data Link Protocol | IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n |
Data Transfer Rate | 300 Mbps |
Encryption Algorithm | AES TKIP WPA WPA2 AES-CCMP |
Features | Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support Quality of Service (QoS) 2T2R MIMO technology Cyclic Delay Diversity (CDD) Space Time Blocking Code (STBC) |
Form Factor | External |
Frequency Band | 2.4 GHz 5 GHz |
Spread Spectrum Method | OFDM DSSS |
Power | |
Power Consumption Operational | 7 Watt |
Power Over Ethernet (PoE) Supported | PoE+ |
Processor / Memory / Storage | |
Hard Drive | None. |
Juniper Networks AP with dual radios 802
Juniper Networks AP with dual radios 802.11a/b/g/n 2x2 MIMO (2SS), single 1000Base-T 802.3af PoE Ethernet port, 4 internal antennas. Not rated for plenum use. Ceiling mount bracket included. For Operation in USA. Those businesses considering acquiring a new WLA322-US will find it is one of the more expansive of the Juniper WLA Access Point devices available. The system offers a solid 11n WLAN user-experience made effective thanks to its high level of reliability. The energy efficiency and ergonomic design further enhances the value of this particular model. A concurrent spectrum analysis combined with unique deployments capable of working around interference sources further increase the value of this access point. The interface is comprised of a concurrent 2-stream dual-radio and a 1 Gigabit Ethernet port. The Ethernet port offers one Gigabit Ethernet 10/100/1000BASE-T autosensing port along with 802.3af PoE power and a RJ45 connector. The 2-stream dual-radio (2.4GHz/ 5GHz) can issue up to 300 Mbps link speed with better performance than the 802.11a/g. The WLA322-US can be best described as an Indoor Dual Radio with 802.11a, 802.11b, 802.11g, and 802.11n wireless protocols. There are a full 64 SSIDs supported with the model. WIDS/WIPS Support with this Juniper Wireless Access Point is visible with ActiveScan and SentryScan. The Quality of Service is visible in 802.11e, WMM, TSPEC, and U-APSD and the security is seen with AES, TKIP, WPA, WPA2, 802.1X, 802.11i, and PMK caching. The dimensions of the interfaces are 1 x 10/100/1000 PoE (RJ-45). There are 4 x Omni-directional internal antennas along with an 802.11n configuration reflected by 2 x 2 MIMO, 2 Spatial Streams.Разработано «Джусто Веб» © 2014
Ресурс создан при поддержке ООО «Джусто Групп» для ознакомления пользователей с продукцией Juniper Networks. Логотипы, названия других компаний и продуктов, упомянутые на данном ресурсе, являются зарегистрированными товарными знаками соответствующих владельцев.