Antenna
Antenna Qty	4
Environmental Parameters
Humidity Range Operating	5 - 95% (non-condensing)
Max Operating Temperature	122 °F
Min Operating Temperature	32 °F
Expansion / Connectivity
Interfaces	1 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
General
Data Link Protocol	IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n
Device Type	Wireless access point
Dimensions (WxDxH)	5.4 in x 1.9 in x 5.6 in
Enclosure Type	External - indoor
Features	Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support Quality of Service (QoS) 2T2R MIMO technology Cyclic Delay Diversity (CDD) Space Time Blocking Code (STBC)
Frequency Band	2.4 GHz 5 GHz
Localization	United States
Power Over Ethernet (PoE) Supported	PoE+
Miscellaneous
Compliant Standards	ICES-003 Class B FCC Part 15 B R&TTE RoHS IEC 60950-1 WEEE EN 301.893 EN 60601-1-2 CAN/CSA C22.2 No. 60950-1
Networking
Compliant Standards	IEEE 802.3u IEEE 802.3i IEEE 802.3ab IEEE 802.11b IEEE 802.11a IEEE 802.3af IEEE 802.11g IEEE 802.1x IEEE 802.11i IEEE 802.11e IEEE 802.11n IEEE 802.3at IEEE 802.3az
Connectivity Technology	Wireless
Data Link Protocol	IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n
Data Transfer Rate	300 Mbps
Encryption Algorithm	AES TKIP WPA WPA2 AES-CCMP
Features	Wireless Intrusion Detection System (WIDS) Wi-Fi Multimedia (WMM) support Quality of Service (QoS) 2T2R MIMO technology Cyclic Delay Diversity (CDD) Space Time Blocking Code (STBC)
Form Factor	External
Frequency Band	2.4 GHz 5 GHz
Spread Spectrum Method	OFDM DSSS
Power
Power Consumption Operational	5 Watt
Power Over Ethernet (PoE) Supported	PoE+
Processor / Memory / Storage
Hard Drive	None.

Juniper Networks AP with single radio 802

Juniper Networks AP with single radio 802.11a/b/g/n 2x2 MIMO (2SS), single 1000Base-T 802.3af PoE Ethernet port, 4 internal antennas.. Not rated for plenum use. Ceiling mount bracket included. For Operation in USA. Those who purchase the WLA321-US will find it among the best of the Juniper WLA Access Point models. The total package of performance, management and security allows this model to deliver on all customer expectations. This device can present a reliable 11n high-speed wire service for lower density environments while never sacrificing any of its performance reliability. The deployments will not be undermined in any way either, and it can navigate sources of interference. This model is highly energy efficient and facilitates two spatial streams, a single radio (users can select between 2.4GHz or 5GHz), a single GbE uplink port (10/100/1000BASE with 802.3af PoE power), and a 2x2 MIMO. The link speed can reach levels of up to 300 Mbps, which is nearly a 6 x better performance than found with the legacy 802.11a/g. With the WLA321-US, users gain 64 supported SSIDs, 802.11a, 802.11b, 802.11g, and 802.11n wireless protocols that are integrated into the device. This unit offers local switching along with bridging and mesh. There are 4 x Omni-directional Internal Antennas that offer spatial diversity. The powering options offer either a PoE injector or a 802.3af compliant Ethernet switch. Support for WIDS and WIPS is part of the mix.