AX411 Wireless LAN Access Point Juniper - AX Серия

Производитель: Juniper
Модель: AX Series
Артикул: AX411

Количество:

 
Antenna Specification
5.15 ~ 5.875 GHz Gain = 5dBi Да
Frequency Range 2.4GHz~2.5GHz/5.15GHz~5.875GHz
Gain 2.4~2.5 GHz Gain = 3dBi
VSWR VSWR< 2
Compliance
EMC FCC 15B 15C 15E Canada RSS-210 EN300328 EN301893 EN301489-1 EN55022
IEEE Standard EEE 802.11a/b/g IEEE 802.11n draft 2.0 IEEE 802.11h IEEE 802.11d IEEE 802.11e
Radio Approvals For a list of supported countries refer to the AX411 Certification Listing Document
Safety UL2043 CAN/CSA-C22.2 No. 60950-1 (2007) UL 60950-1 EN 60950-1 IEC 60950-1
Security 802.11i Wi-Fi Protected Access 2 (WPA2) WPA 802.1X Advanced Encryption Standards (AES) Temporal Key Integrity Protocol (TKIP)
Data Rates
802.11a Да
802.11g Да
802.11n Да
Dimensions
9.5" x 5.8" x 1.9" (242mm x 147mm x 48mm) Да
Draft 802.11n 2.0 Capabilities
2x3 MIMO with two spatial streams Да
Packet aggregation A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)
PHY data rates up to 300 Mbps Да
STBC Range enhancement support Да
EAP Types
EAP-SIM Да
EAP-TLS Да
EAP-TTLS/MSCHAPv2 Да
PEAPv0/EAP-MSCHAPv2 Да
PEAPv1/EAP-GTC Да
Environmental
Nonoperating (storage) temperature –40° to 149°F (–40° to 65°C)
Operating humidity Up to 95 percent @ 25°C
Operating temperature –4 to +122°F (–20 to +50°C)
Interfaces
10/100/1000 Ethernet port Да
Optional Power Supply Locking connector Да
Serial Console port Да
Power Draw
12.4w Да
Power Options
Power Over Ethernet (POE) 802.3af
Power Supply and Power Injector 100 to 240 VAC- 50 to 60 Hz

The AX411 Access Point supports the new IEEE 802.11n wireless networking standard with backward compatibility for IEEE 802.11a/b/g standards.

The Juniper Networks AX411 Access Point provides network access for wireless clients such as laptop or desktop computers, personal digital assistants (PDAs), and any other device equipped with a Wi-Fi adapter. The AX411 Access Point supports the new IEEE 802.11n wireless networking standard with backward compatibility for IEEE 802.11a/b/g standards.
The AX411 Access Point is managed by an SRX210, SRX240, or SRX650 Services Gateway. You manage and configure access points through the command-line interface (CLI) and J-Web interface of the services gateway.